@article {aGene-Molac, title = {Fruit detection and 3D location using instance segmentation neural networks and structure-from-motion photogrammetry}, journal = {Computers and Electronics in Agriculture}, volume = {169}, year = {2020}, month = {02/2020}, abstract = {

The development of remote fruit detection systems able to identify and 3D locate fruits provides opportunities to improve the efficiency of agriculture management. Most of the current fruit detection systems are based on 2D image analysis. Although the use of 3D sensors is emerging, precise 3D fruit location is still a pending issue. This work presents a new methodology for fruit detection and 3D location consisting of: (1) 2D fruit detection and segmentation using Mask R-CNN instance segmentation neural network; (2) 3D point cloud generation of detected apples using structure-from-motion (SfM) photogrammetry; (3) projection of 2D image detections onto 3D space; (4) false positives removal using a trained support vector machine. This methodology was tested on 11 Fuji apple trees containing a total of 1455 apples. Results showed that, by combining instance segmentation with SfM the system performance increased from an F1-score of 0.816 (2D fruit detection) to 0.881 (3D fruit detection and location) with respect to the total amount of fruits. The main advantages of this methodology are the reduced number of false positives and the higher detection rate, while the main disadvantage is the high processing time required for SfM, which makes it presently unsuitable for real-time work. From these results, it can be concluded that the combination of instance segmentation and SfM provides high performance fruit detection with high 3D data precision. The dataset has been made publicly available and an interactive visualization of fruit detection results is accessible at http://www.grap.udl.cat/documents/photogrammetry_fruit_detection.html

}, keywords = {Fruit detection, Fruit location, Mask R-CNN, Structure-from-motion, Terrestrial remote sensing}, issn = {ISSN: 0168-1699}, doi = {https://doi.org/10.1016/j.compag.2019.105165}, url = {https://doi.org/10.1016/j.compag.2019.105165}, author = {Gen{\'e}-Mola, Jordi and Sanz, Ricardo and Rosell-Polo, Joan R. and Morros, J.R. and Ruiz-Hidalgo, J. and Ver{\'o}nica Vilaplana and Gregorio, Eduard} } @article {aGene-Mola20, title = {Fuji-SfM dataset: A collection of annotated images and point clouds for Fuji apple detection and location using structure-from-motion photogrammetry}, volume = {Data in Brief}, year = {2020}, month = {06/2020}, keywords = {Fruit detection, Mask R-CNN, Photogrammetry, Structure-from-motion, Terrestrial remote sensing, Yield mapping, Yield prediction}, doi = {https://doi.org/10.1016/j.dib.2020.105591}, author = {Gen{\'e}-Mola, Jordi and Sanz, Ricardo and Rosell-Polo, Joan R. and Morros, J.R. and Ruiz-Hidalgo, J. and Ver{\'o}nica Vilaplana and Gregorio, Eduard} } @article {aGene-Molab, title = {Fruit Detection in an Apple Orchard Using a Mobile Terrestrial Laser Scanner}, journal = {Biosystems Engineering}, volume = {187}, year = {2019}, month = {09/2019}, chapter = {171}, abstract = {

The development of reliable fruit detection and localization systems provides an opportunity to improve the crop value and management by limiting fruit spoilage and optimized harvesting practices. Most proposed systems for fruit detection are based on RGB cameras and thus are affected by intrinsic constraints, such as variable lighting conditions. This work presents a new technique that uses a mobile terrestrial laser scanner (MTLS) to detect and localise Fuji apples. An experimental test focused on Fuji apple trees (Malus domestica Borkh. cv. Fuji) was carried out. A 3D point cloud of the scene was generated using an MTLS composed of a Velodyne VLP-16 LiDAR sensor synchronized with an RTK-GNSS satellite navigation receiver. A reflectance analysis of tree elements was performed, obtaining mean apparent reflectance values of 28.9\%, 29.1\%, and 44.3\% for leaves, branches and trunks, and apples, respectively. These results suggest that the apparent reflectance parameter (at 905 nm wavelength) can be useful to detect apples. For that purpose, a four-step fruit detection algorithm was developed. By applying this algorithm, a localization success of 87.5\%, an identification success of 82.4\%, and an F1-score of 0.858 were obtained in relation to the total amount of fruits. These detection rates are similar to those obtained by RGB-based systems, but with the additional advantages of providing direct 3D fruit location information, which is not affected by sunlight variations. From the experimental results, it can be concluded that LiDAR-based technology and, particularly, its reflectance information, has potential for remote apple detection and 3D location.

}, issn = {1537-5110}, doi = {10.1016/j.biosystemseng.2019.08.017}, url = {https://authors.elsevier.com/c/1Zmc45Tbkk9EHW}, author = {Gen{\'e}-Mola, Jordi and Gregorio, Eduard and Guevara, Javier and Auat Cheein, Fernando and Sanz, Ricardo and Escol{\`a}, Alexandre and Llorens Calveras, Jordi and Morros, J.R. and Ruiz-Hidalgo, J. and Ver{\'o}nica Vilaplana and Rosell-Polo, Joan R.} } @conference {cGene-Mola18, title = {Fruit Detection Using Mobile Terrestrial Laser Scanning}, booktitle = {AgEng 2018,}, year = {2018}, month = {07/2018}, address = {Wageningen (Netherlands)}, abstract = {

The development of reliable fruit detection and localization systems is essential for future sustainable agronomic management of high-value crops. Up to date, most proposed systems on fruit detection and characterization are based on RGB cameras and thus affected by intrinsic constraints, such as variable lighting conditions and camera calibration. This work presents a new technique that uses a mobile terrestrial laser scanner to detect and localize fruits regardless of the prevailing lighting conditions and without the need of a previous calibration. An experimental test focused on two Fuji apple trees (containing 139 and 145 apples each) was carried out. A 3D point cloud of this scene was generated using a Velodyne VLP-16 LiDAR sensor synchronized with a RTK-GNSS receiver. A reflectivity analysis of tree elements was performed, obtaining mean reflectivity values of 28.9\%, 29.1\%, and 44.3\% for leaves, trunks, and fruits, respectively. These results suggest that the reflectivity parameter can be useful to localize fruits in the tree. From this knowledge, a three-step fruit detection algorithm has been developed: 1) reflectivity thresholding to remove most of the leaves and trunks from the original point cloud; 2) statistical outlier removal to reduce noise; 3) connected components clustering using a density-based algorithm. By applying this algorithm to our dataset, a localization success of 85\%, a detachment success of 78.8\%, and a false detection rate of 15.2\% were obtained. These detection rates are similar to those obtained by current RGB-based system, but with the additional advantage of providing direct 3D fruit location information (global coordinates) which is not affected by sunlight variations. It can be concluded that LiDAR technology and, particularly, its reflectivity information, might have potential use in fruit detection. Future work should include the application of this fruit detection technique on a wider range of crop types

}, author = {Gen{\'e}-Mola, Jordi and Gregorio, Eduard and Guevara, Javier and Auat, Fernando and Escol{\`a}, Alexandre and Morros, J.R. and Rosell-Polo, Joan R.} }